00-1-11 |
Eurocopter |
Create component card for each tension torsion strap. Replace as specified | BK 117 |
99-9-6 |
Eurocopter |
Inspect torque axle play and rotation binding of tail rotor spider plate for bearing seizure. | AS 350B,B1,B2,BA,D |
99-9-52 |
Bombardier |
Inspect for concurrent chaffing of both fuel maniflold and IDG wire to prevent exposure of live wire to fuel | CL-601-3R,CL-604,CL-600-2B16 |
99-9-5 |
Bell |
Inspect main rotor hub for frettings and check for correct torque setting of retaining bolts to prevent main rotor bearing fatigue filure | 230 |
99-9-20 |
Bell |
Inspect main rotor hub and connecting components to prevent fretting induced fatigue cracking of main rotor flapping bearing assembly and connecting components | 222A,B,222U |
99-9-17 |
Tele-Cont |
Superseded by 99-19-1 |
99-9-16 |
Eurocopter |
Inspect main blade spar skins and blade root reinforcement strip area for cracks, separation, or corrosion to prevent failure of rotor blade in flight | 318C |
99-9-15 |
Raytheon |
Inspect wiring and components around flight control surface for interference to prevent obstruction of aileron and elevator control | A36, B36TC,58,C90,B200,B300 |
99-9-10 |
Raytheon |
Install fuel element in landing gear hand pump suction line to prevent gear failure | C90A,B200,300,B200C |
99-8-7 |
MDHC |
Supersedes 98-17-14 | Check specified relay; replace as directed | 369 E, FF; 500N; 600N |
99-8-6 |
Eurocopter |
Recurringly inspect each blade spar skin & blade root reinforcement strip area; replace as directed | SE 3160; SA 316B, 316C, 319B |
99-7-8 |
Eurocopter |
Recurringly inspect each blade spar skin & blade root reinforcement strip area; replace as directed | Specified SA315B |
99-7-7 |
Eurocopter |
Inspect each main rotor head sleeve lug; replace if cracked | Specified SA330J |
99-7-4 |
Williams |
Remove & replace specified high pressure turbine disk | FJ44-1A |
99-7-2 |
Eurocopter |
Recurringly inspect specified blade strips; replace as directed | Specified SA330F, G, J |
99-7-19 |
AlliedSignal |
Inspect fuel flow tube assembly; replace as directed | TFE731-40R-200G |
99-7-18 |
Robinson |
Insert information into the normal procedures section of the RFM | R44 |
99-7-17 |
Robinson |
Insert information into the normal procedures section of the RFM | R22 |
99-7-15 |
Bell |
Review records for yoke bending loads that could cause failure of tail rotor yoke; replace as directed | 204; 205, A-1 |
99-7-11 |
Socata |
Inspect outboard hinge fittings of horizontal stabilizer; replace hinge fitting if cracked | TBM 700 |