01-25-2 |
Enstrom |
Create component card for hub plate; replace hub plate as specified | 480 |
01-25-10 |
Pilatus |
Install new design flap control and warning unit as specified | PC-12 |
01-24-8 |
Eurocopter |
Supersedes 00-17-7 | Add a stop to front rail and modify rear stop to middle rail as specified | EC120B |
01-24-7 |
Agusta |
Superseded by 07-26-52 |
01-24-51 |
MD Helicopter |
Inspect tailboom attachments as specified | 600N |
01-24-3 |
Dassault |
Revise limitations section of AFM as specified | 50 |
01-24-12 |
Rolls-Royce Engine |
Remove and replace helical torquemeter gearshaft assemblies as specified | 250 sereies |
01-24-11 |
Raytheon |
Revise Emergency Procedures of AFM as specified | 400 series, MU-300 |
01-23-9 |
Honeywell |
Supersedes 86-11-5 | Replace fan rotor discs as specified | TFE731-2,-3,-4 series |
01-23-8 |
Hartzell Propeller |
Perform eddy current inspection of propeller hub fillet radius for cracks as specified | Y-shank propellers Piper PA-32 series |
01-23-6 |
Socata |
Inspect upper surface of fuel tank air vent valve for modification stamp as specified | TBM 700 |
01-23-5 |
Socata |
Modify front seats that have solid metal set pans | TB 9,10,20,21,200 |
01-23-4 |
Socata |
Inspect lower rudder hinge fitting for cracks | TB 9,10,20,21,200 |
01-23-3 |
Cessna |
Supersedes 80-4-8 | Inspect doorpost map light switch insulator and fuel line as specified | 172 |
01-23-17 |
Garmin |
Modify GNS430 as specified | specified unit serial numbers |
01-23-11 |
Eurocopter |
Modify left-hand and right-hand cabin sliding door rails as specified | EC 155B |
01-23-10 |
Raytheon |
Inspect flap flex shaft assemblies and flap actuator assembly as specified | A36,B36TC,58,35,33,95,55 |
01-22-7 |
Honeywell Engine |
Replace fuel manifolds as specified | LTP101,LTS101 |
01-22-15 |
Pilatus |
Inspect front and rear frames of cargo door for lightening holes with plain rims | PC-12 |
01-22-14 |
Overland Aviation Services |
Replace fire extinguisher system bottle cartridge as specified | various aircraft |