75-1-2 |
Piper |
Install flap travel kit | PA-36-285 (SN 36-7360001 thru -7460026) |
74-9-6 |
Lake |
Inspect & clean or replace fuel inj restrictor fitting | LA-4-200 (thru 601) |
74-9-4 |
Piper |
Relocate rear seat attachments | PA-28-140,-180,-235,-28R-200 |
74-9-2 |
Piper |
Relocate stall warning light per SB 103 | PA-32-260, PA-32-300 |
74-8-9 |
Gulfstream |
Revised 7/96 | install "No Smoking" placard | 1159 series |
74-8-11 |
deHavilland |
Rework seat rails | DH-6 (SN 136 thru 368) |
74-8-1 |
ARC |
Inspect autopilots actuators | all 300, 400, 800 series autopilots |
74-6-2 |
Cessna/Piper |
Rework cabin heater | Avcon 180hp on C-150,170,172,175;PA-28-140 |
74-6-1 |
Piper |
Revised 10/74 | rework turbochargers | PA-23-235,-250 |
74-5-5 |
Beech |
Revised 5/74 | replace pilot window | 60 & A60 |
74-5-1 |
Beech |
Inspect fuel lines in wings | B19, C23, B24R |
74-4-1 |
Cessna |
Check for cracks in aft bulkhead | 172 (SN 172-60759 thru 61495) |
74-3-5 |
Cont Eng |
Superseded by 74-18-7 | supersedes 67-8-2 |
74-3-3 |
IAI |
Revised 3/77 | main landing gear inspection | models 1121 & 1123 |
74-3-2 |
Beech |
Check landing gear shock strut piston | F33A;V35B;A36;B55,-A;E55,-A;58,-A |
74-26-9 |
Bendix |
Inspect magneto for solid steel drive shaft bushing | S-20,-200,-1200 |
74-26-8 |
Rockwell |
Rework low oil pressure warning system | NA 265-40,-60,-70 |
74-26-7 |
Piper |
Assure proper "spins not approved" placard installed | PA-28-180 |
74-26-5 |
P&W Eng |
Inspect fuel control units | JT15D-1,JT15D-4 |
74-26-4 |
Piper |
Inspect & rework fuel regulator shutoff valve | PA-31,-300 |