| 75-14-4 |
Schweizer |
Revised 7/77 | inspect rudder cables | all G-164, G-164A & G-164B |
| 75-14-3 |
Beech |
Modify Collins AP106 autopilot | 200 (SN BB-2 thru -66) |
| 75-13-5 |
BAe |
Revised 8/75 | install new cockpit side window | all DH/BH-125 |
| 75-13-2 |
Beech |
Test manifold & RPM gauges, install "Do not exceed" placard | 95 |
| 75-12-9 |
Gulfstream |
Revised 10/81 | install bob weights | 500,680,720 series thru SN3323 |
| 75-12-7 |
McCauley |
Replace prop governors | DCF-,DCFS-,DCFU-,DCFUS-290D1A/T2 |
| 75-12-6 |
Piper |
100-hr inspect fin spar-to-fuselage attachment | PA-24,-250,-260,-400 |
| 75-12-4 |
Rockwell |
Inspect and/or modify eng support beams outer skin | NA-265-40,-60 |
| 75-12-10 |
Collins |
Modify servos on AP106 autopilot |
| 75-11-6 |
Bellanca |
Revised 6/75 | modify fuel check valve | 17-31,-31TC,-31A,-31ATC |
| 75-11-5 |
Piper |
Replace glare shield panel | PA-23-250 (SN -7554001 thru -7554060) |
| 75-11-4 |
UAC-P&W |
Install magnetic chip detector | PT6 series engines |
| 75-11-2 |
Maule |
Prevent fuel leakage in cabin | M-4-210, M-4-210C, M-5-210C |
| 75-11-1 |
Cessna |
Revised 3/76 | inspect fuel lines thru firewall & wing spars | all 320 |
| 75-10-5 |
AiResearch |
Revised 7/75 | modify torque sensor arm | TPE331-series engines |
| 75-10-3 |
Piper |
Modify baggage door | PA-32-260, PA-32-300 |
| 75-1-7 |
Beech |
Modify exhaust elbow asmbly | S35,V35,-A,-B w/Cont eng TSIO-520-D |
| 75-1-5 |
Lyc Eng |
Replace impeller | model T5313B |
| 75-1-4 |
Beech |
Replace fuel selector valve guard | 23, A23, A23-24, A24R |
| 75-1-3 |
Rockwell |
Replace altitude & airspeed switch | all NA-265 series aircraft |
