76-17-3 |
Gulfstream |
Rework bonded skins | AA1,-1A,-1B; AA5,-5A,-5B |
76-17-2 |
Beech |
Revised 10/78 | reinforce window frame | 58P,A (SN TJ-2 thru -58) |
76-16-7 |
Cessna |
Supersedes 76-9-8 | periodically inspect eng mounts; replace if cracked | 401, 402 & 414 w/Allison turboprop |
76-16-5 |
Mitsubishi |
Superseded by 78-3-5 |
76-16-4 |
Beech |
Superseded by 77-22-1 |
76-16-2 |
Airborne |
Replace vacuum pump | models 113A; 200CC,-CW; 220CC,-CW; 221CC; 222CW |
76-16-1 |
AiResearch |
Supersedes 74-26-11 | correct pinion gear bolts & gear transfer tube | TPE-331 |
76-15-8 |
Piper |
Revised 9/76 | install nose gear trunnion mod kit 761074V | PA-28R,-32R |
76-15-7 |
Piper |
Modify elevator balance weights | PA-31-325,-350 |
76-15-1 |
Mooney |
Superseded by 86-19-10 | supersedes 69-5-3 |
76-14-8 |
Cessna |
Inspect trim tab actuator bolt | 177B(SN -2255 thru -2494);177RG (thru SN -937) |
76-14-7 |
Cessna |
Revised 8/85 | replace landing gear saddle each 1000 hrs | 210 thru 210J & T |
76-13-9 |
Cont Eng |
Revised 8/76 | check for crack or replace left rear exhaust elbow | TSIO-520-L |
76-13-7 |
Cessna |
Replace fork bolts on landing gear torque tube prior to 2000 hrs | 400 series |
76-13-6 |
deHavilland |
Restore lightning strike protection | all DHC-6 |
76-13-5 |
Beech/BAe |
Check terminal blocks on firewall | Beech E55,A;58,A;B60; BAe BH125-600A |
76-13-3 |
Beech |
Superseded by 79-1-2 |
76-13-10 |
Schweizer |
Revised 11/76 | Dye penetrant inspect gear struts | G164,-A (SN 1 thru 1064) |
76-12-9 |
Rockwell |
Check rudder static balance | NA-265-70(SN 370-1 thru -9);-80(SN 380-1 thru -44) |
76-12-11 |
Lake |
Check fuel filter for corrosion | all LA-4-200 |