76-4-2 |
Beech |
Replace seat locking pins | C90, E90, A100, 200 |
76-4-11 |
Piper |
Rework control shaft collar attachment | PA-31- |
76-4-10 |
Piper |
Modify battery drain & vent sys | PA-31-350 (SN 31-5001 thru -7552073) |
76-4-1 |
Cessna |
Revised 1/77 | supersedes 71-24-7 | replace Electrol main gear actuator | 210 |
76-3-7 |
Beech |
Preclude loss of rudder control | 200 (SN BB-2 thru -58) |
76-3-5 |
Beech |
Rework tachometer cable | B33, C33, E33, F33, G33, P-35 |
76-3-1 |
Piper |
Rework elevator trim tab control sys | PA-31T (SN 31T-740002 thru -7620012) |
76-26-3 |
Rallye |
Inspect carb heat flap | MS892-A,-E150; 893A,E; 894A,E |
76-25-6 |
Piper |
Superseded by 95-26-13 |
76-25-5 |
Beech |
Install strap in wing trailing edge | A23-19,23,24,A24R series |
76-25-4 |
Beech |
Superseded by 80-4-7 |
76-25-2 |
Piper |
Superseded by 83-20-3 |
76-24-5 |
Rolls-Royce |
Replace exhaust turbine cone | Viper 601-22 on DH/BH-125 |
76-24-4 |
Rallye |
Inspect rocker oil return pipe | MS892-A,-E-150,MS893A (SN 12674 & prior) |
76-24-2 |
Lake |
Replace oil cooler model 8406J (SN 101 thru 1500) | all LA-4-200 |
76-23-3 |
Bellanca |
Superseded by 08-5-11 |
76-23-2 |
Gulfstream |
Modify cabin vent valve & air ducts | 114 (SN 14089 thru 14158) |
76-22-9 |
Gulfstream |
Replace oil coolers 10568B & 10578B | AA5A,-5B |
76-22-4 |
Mitsubishi |
Periodically inspect or replace landing gear door operating cables | MU-2B-30,-35 |
76-22-3 |
Beech |
Periodically inspect elevators for cracks or install update kit | 99, 100, B100 |