82-14-1 |
Hughes |
Install flow kit on Chadwick C-20 aux fuel sys | 369 series |
82-13-6 |
Schweizer |
Supersedes 80-17-8 | annually inspect or modify aileron bellcrank | G-164B (SN 1B thru 656B), G164C (SN 1C thru 44C), G-164D (SN 1D thru 16D) |
82-13-5 |
Aerospatiale |
Superseded by 11-18-12 |
82-13-4 |
Hiller |
Revised 9-13-82 | supersedes 80-18-13 | repetitive inspect torsional coupling | UH-12 |
82-13-3 |
Allison |
Prior to 10-1-82 modify fuel control filter assy | 250-C20,-C20B |
82-13-1 |
Bendix |
Periodic inspect or replace gripper bushing block, & check eng pistons & valves on eng's w/S-1200 series magnetos | various Continental, Franklin & Lycoming engs. |
82-12-7 |
Aerospatiale |
Replace attach bolts in tail rotor transmission assembly | all SA330 series |
82-12-4 |
Allison |
Check or replace governors | 250-B15G, -B17, -B17B, -B17C engs |
82-12-3 |
BAe |
Install 275 ampere airfuse | HS/BH/DH-125 series |
82-12-2 |
BAe |
Revised 6/85 | Periodically inspect flaps or install mod 252772 | 125 series |
82-12-1 |
BAe |
Install filters in landing gear restrictor valves | HS/BH/DH-125 series |
82-11-5 |
Bendix |
Comply with SB 617 on D-2000, -2200 series magnetos installed on Lyc O-320, O-360, IO-360, HIO-360, TO-360, O-540, IO-540, TIO-540; Cont 6-285 |
82-11-4 |
Piper |
Modify emergency exit window | PA-31T, -31TI, -31TIIXL |
82-11-3 |
BAe |
Revised 10/82 | Remount elevator pitch trim switch | HS-125-700A |
82-11-2 |
Gulfstream |
Inspect or repair elevator spar & trim tabs each 50 hrs | G1159, -B |
82-11-1 |
Robinson |
Preflight & then each 50 hr inspect tube frame | R22 (all thru 0287) |
82-10-6 |
Hiller |
Superseded by 82-15-2 |
82-10-5 |
AiResearch |
Superseded by 82-27-7 |
82-10-2 |
Rockwell |
Revised 5/82 | each 300 hrs inspect flap screw jack | NA-265-60 (SN -5 thru -122), -65 (SN -1 thru -76) |
82-10-1 |
Aerospatiale |
Inspect tail rotor blade | AS350, AS355 |