| 82-27-3 |
Rajay |
Inspect or replace turbine housing each 200 hrs | Cont TSIO-360-; Lyc IO/LIO-20, O-360, IO/LIO-360 | not Rajay approved but could be on Cont O-470, IO-470, IO-520, TI-540; Lyc O-320, TO-360, O-540, TIO-540 |
| 82-27-2 |
McCauley |
Revised 2/83 | dye check prop blade shank on C200,-300,-400 series prop | 172RG,R172K;177RG;180G/K;182M/Q;R182;TR182;T182R;A185F; T188C; U206G; TU206G;207A;T207A;210N;T210M/N; P210N; 337G/H; T337G/H; P337H; M20J,K |
| 82-27-13 |
Piper |
Revised 8/83 | supersedes 82-8-6 | periodically inspect, rework flap sys | PA-31 series thru 1978 |
| 82-27-10 |
Rockwell |
Rework stabilizer trim actuator | NA265-65 (SN 465-1 thru -76, 306-114) |
| 82-27-1 |
McCauley |
Supersedes 80-4-5 | dye check prop hub 1A170/FFA each 200 hrs | AA-5B |
| 82-26-7 |
Bell |
Revised 8/84 | modify tailboom attach longeron & inspect each 250 hrs | 214ST |
| 82-26-6 |
deHavilland |
Inspect w/s alcohol de-ice sys each 200 hrs or install elec de-ice | DHC-6 |
| 82-26-51 |
Bell |
Revised 12/83 | daily inspect yoke; install flex indicator kit | 412 |
| 82-26-5 |
Cessna |
Periodically inspect or replace rudder weight rib | 335, 340, 340A thru SN 1521 |
| 82-26-2 |
Rockwell |
Replace vertical floor panel | NA-265-60 |
| 82-25-7 |
Canadair |
Replace pitch trim actuator | CL-600-1A11 |
| 82-25-4 |
Aerospatiale |
Inspect torque on flapping hinge nut each 300 hrs | SA330J |
| 82-25-2 |
Falcon |
Modify landing gear mechanism | 10 |
| 82-25-10 |
Avco Lyc |
Replace compressor vane & turbine nozzle | ALF-502 series |
| 82-25-1 |
Sikorsky |
Revised 12/86 | inspect landing gear rods each 100 hrs | SA-76A |
| 82-24-5 |
Allison |
Install steel ball bearing separators | 250 series engs |
| 82-24-1 |
Enstrom |
Periodically inspect drive belt clutch, install P/N 28-19035-3 | F28A,C,F; 280,C,F |
| 82-23-8 |
Canadair |
Inspect or replace throttle 90601-65 | CL-600-1A11 |
| 82-23-6 |
Swearingen |
Modify landing gear door | Metro thru 1981, Merlin III & IV |
| 82-23-51 |
Robinson |
Superseded by 96-11-8 |
