82-9-51 |
Canadair |
Revise operating procedures | CL-600 |
82-9-3 |
Beech |
Supersedes 81-9-5 | inspect/replace shoulder harness brackets | 77 (thru SN -269) |
82-9-2 |
Rolls-Royce |
Revised 5/83 | remove fuel manifold connection hose | Dart engs |
82-9-1 |
Cont Eng |
Rework & test fuel lines | TSIO-520-J, -K, -N, -NB (See AD for specific engs) |
82-8-8 |
BAe |
Deleted 7-12-82 |
82-8-7 |
BAe |
Replace flap actuator each 8000 landings | DH-125-1A, -3A |
82-8-6 |
Piper |
Superseded by 82-27-13 |
82-8-5 |
Wing |
Revised 8/82 | rework or replace cabin heater | D-1 (SN 003 thru 009) |
82-8-4 |
Varga |
Supersedes 71-17-5 & 81-21-7 | replace elevator horn balance arm | 2150A,2180 |
82-8-2 |
Misubishi |
Replace eng wiring | MU-2B-10,-15,-20,-25,-26,-30,-35,-36 (SN 501 thru 696) |
82-7-4 |
Schweizer |
Superseded by 07-17-2 |
82-7-3 |
Janitrol |
Superseded by 96-20-7 |
82-7-2 |
Cessna |
Check crankcase breather & seal if STC'd | 170A,B;172 thru-P;175 series;P172D |
82-6-9 |
Canadair |
Replace lock pins in landing gear stay | CL-600 (SN 1002 & up) |
82-6-8 |
Sikorksy |
Modify DC junction box | S-76A (all thru SN 760206) |
82-6-7 |
Bell |
Magnetic inspect tail rotor yokes | 214B (SN 28001 thru 28060) |
82-6-6 |
Canadair |
Modify flap drive shaft supports | CL-600 (SN 1012 thru 1024) |
82-6-51 |
Sikorksy |
Inspect main gearbox & pinion each 100 hrs | S-76A |
82-6-5 |
Canadair |
Modify landing gear manual release | CL-600 (SN 1005 thru 1023) |
82-6-4 |
Canadair |
Modify cabin door handle | CL-600 (SN 1005 thru 1019) |