|
Airworthiness Directives
NOTE - This AD note listing is intended as a guide only and
should not be relied upon as conclusive evidence of AD applicability on
any particular aircraft. Entire Airworthiness Directives may be accessed
at: http://rgl.faa.gov.
Showing Results 3161 - 3180 of 5103
| View All
< Previous |
154
|
155
|
156
|
157
|
158
|
159
|
160
|
161
|
162
|
163
| Next >
AD No. |
MAKE |
Condensed description of ad note |
84-13-1 |
Fairchild |
Supersedes 84-5-1 | modify & inspect junction box | SA226TC; SA227-AC,-AT,-TT |
84-12-4 |
Mitsubishi |
Rework bleed air coupling nuts | MU-2B, -10, -15, -20, -25, -26, -26A, -30, -35, -36, -36A, -40, all MU-2 series -60 (SN 1 thru 1564) |
84-12-2 |
Bell |
Replace beam support fitting | all 222 series |
84-12-1 |
Hughes |
Revised 10/82 | install authorized Hughes main rotor blades | 369D, E |
84-11-51 |
Garrett |
Superseded by 84-20-51 |
84-11-1 |
Hughes |
Inspect longitud. control rod for binding | 369D(SN 110871D), 369E(-1E thru -43E) |
84-10-7 |
Gulfstream |
Modify emergency landing gear sys | all 680T,V,W; 681 (SN 681-6001 thru -6048) |
84-10-6 |
Garrett |
Revised 12/84 | supersedes 84-7-8 | inspect fuel pump drive shaft torque | TPE331-24, -43, -47, -55, -1, -2, -3, -5, -6, -10 (except 10A), -11 |
84-10-2 |
Sikorky |
Supersedes 80-23-51 | inspect main rotor blade spar for cracks | all S-76 series |
84-10-1 |
Cessna |
Revised 7/88 | install quick drains; annually inspect fuel tank for wrinkles | 180 series; 182 (SN-33000 thru -66590); R182 (thru SN-00583); 185 (thru SN-04414); 188 (-0446 thru -3856 & -0967T thru -3966T); all T188; 190; 195; 205; 206; U206; TU206 (thru -4649); P206; TP206 (thru -647); 207; T207 (thru SN-00771); 210 (thru SN -58818); T210 (thru SN -0197) |
84-1-4 |
Garrett |
Supersedes 82-27-7 | inspect turbine wheels | TPE-331-1, -2, -3, -5, -6 |
84-1-3 |
Aerospatiale |
Revised 4/87 | life limit gearbox 'A' frame | SA315, SA316, SA319 |
84-1-2 |
Hughes |
Replace swashplate bearing assembly | 369, A, D, E, H series |
83-9-3 |
Bell |
Before 2400 hrs, replace rotor trunnion & mast asmbly | 222 (SN 47006 thru -89) |
83-9-2 |
Mitsubishi |
Supersedes 77-13-12 | modify tip tank conduit tubes | MU-2B-25,-26 (SN 239 thru 328), MU-2B-30, -35, -36 (SN 501 thru 673) |
83-8-5 |
Beech |
Modify air conditioner installation | 60,A60,B60 (SN P-4 thru P-592) |
83-8-4 |
Aerospatiale |
Revised 9/83 | replace pinion cages | AS355 |
83-8-3 |
Gates |
Inspect hydraulic line, wire bundle pre-SB35/36-29-1 | 35(thru SN-495);36(thru-52) |
83-8-1 |
Hartzell |
Revised 4/83 | supersedes 78-18-1 | replace and/or retorque prop attach bolts | PT6A, TPE-331 engs |
83-7-9 |
Canadair |
Revised 11/93 | verify generator & APU feeder wires properly installed | CL-600 |
Showing Results 3161 - 3180 of 5103
| View All
< Previous |
154
|
155
|
156
|
157
|
158
|
159
|
160
|
161
|
162
|
163
| Next >
|